MOST RELEVANT RESULT(S) FOR :

Author Topic: Sharpness at f2.0 vs f3.2  (Read 3130 times)

Offline martigorn

  • Newbie
  • *
  • Posts: 1
Sharpness at f2.0 vs f3.2
« on: March 06, 2013, 08:01:05 pm »
This a comment for this page on the website
Hello,
I like the RX1 a lot, but center sharpness gets A LOT better when stopping down from f2.0 to f2.8 or f3.2. At 100% view, this is fully field relevant: Details and sharpness at 2.0 are okay, from 3.2 they are brilliant. I must admit to be somewhat disappointed by that. Does this practical view fit to Your lab results (which are somewhat abstract to me), i.e. is that "perfectly normal" or did I get a bad copy ?

Yours sincerely

Martin

Offline Emilie_DxOMark

  • Administrator
  • Hero Member
  • *****
  • Posts: 530
Re: Sharpness at f2.0 vs f3.2
« Reply #1 on: March 08, 2013, 06:28:55 pm »
Hello Martin,

Thanks for your interest in DxOMark.

You are right but we would not say "a lot", as we measured a slight loss of sharpness at f/2.0 and we did not measure any significant difference between f/2.8 and f/4.
To be convinced you should have a look to the acutance field map.

Best regards,

The DxOMark team